article thumbnail

Why latency is the new outage

Kentik

Not as difficult as time travel, but it’s difficult enough so that for 30+ years IT professionals have tried to skirt the issue by adding more bandwidth between locations or by rolling out faster routers and switches. Each switch and router we pass through introduces a bit of latency that adds up quickly. How latency is measured.

TCP 116
article thumbnail

How can i optimize this network

Network Engineering

I got a router on a stick and I want to optimize it by reducing its cost and also the configuration costs This topology is to facilitate inter Vlan routing so Vlan1 can communicate with Vlan2. The question is how will this topology be optimized. The topology is illustrated in the figure

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

IP Conflict and VPN-Based Overlay Network Setup over WAN / VPN Solutions for Sites with Overlapping IP Address Ranges

Network Engineering

I want to ping from a computer located in SITE C to computers in SITE A and SITE B within the topology. 24 | | [Router] [Router] | | 192.168.2.0/24 24 | | [Router] [Router] | | 172.16.11.0/24 24 | [Router C] | 192.168.3.0/24 What VPN technologies can I use to overcome these problems? 24 192.168.1.0/24

VPN 52
article thumbnail

Today’s Enterprise WAN Isn’t What It Used To Be

Kentik

Why do we need to create site-to-site VPNs or some sort of modern SD-WAN topology connecting all our branches when almost all traffic goes to the public internet and the cloud? We still need to connect our infrastructure to the public internet, so the enterprise WAN is still about routers, circuit IDs, and perimeter firewalls.

WAN 98
article thumbnail

When does accepting a more-specific prefix for the IXP LAN cause a black hole for connectivity to the IXP LAN?

Network Engineering

Let's say, that there is a following network topology: As seen on the drawing, the router named as30-r1 is connected to IXP LAN with network 10.81.80.0/22 count 1 sends an ICMP echo request message correctly to as10-r1 router. Accepting these routes may create a black hole for connectivity to the IXP LAN. 24 user 0 192.168.5.1

LAN 52
article thumbnail

How to Configure Static Routes on Cisco

NW Kings

In this blog, we will explore what static routes are, how they differ from dynamic routes, and how to configure them on routers like Cisco devices. This feature in networks predicts and stabilizes the topology. This characteristic makes them efficient for routers with limited processing capabilities.

Routers 52
article thumbnail

Why is my SaaS application so slow?

Kentik

Notice above that the routers used in the connection are looking pretty snappy. If you don’t have fancy tools that tell you who is communicating through the router, take all other internet capable devices offline. If you have access to your local router, login and see if you can give connections to your SaaS application a priority.