article thumbnail

DHCP Relay Issue: Router Can Ping DHCP Server, but End Devices Cannot Obtain IP Address - Packet Tracer [closed]

Network Engineering

The router can ping the DHCP server, but end devices connected to the router cannot obtain an IP address. Heres my setup and what Ive tried so far: Network Setup: DHCP Server: IP: 192.10.0.2 24 (Default Gateway: 10.10.0.1) 24 (Default Gateway: 10.20.0.1) 24 (Default Gateway: 10.30.0.1) Scopes: 10.10.0.0/24

article thumbnail

3 firewalls on a layer-2 switch, 1 acts as a default gateway for all devices

Network Engineering

I am currently trying to setup a network madeup of a large layer-2 switch, some computers connected to that switch, 3 Cisco Firepower 1120 ASA Firewalls, and other networks beyond 2 of the firewalls, with the other firewall acting as the default gateway. network(ex: Desktop 0) has 192.168.1.254 as its default gateway. 255.255.255.0

Firewall 130
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Redundant router-switch connection

Network Engineering

InterVLAN traffic is routed through the gateway which has IP address in every VLAN that can be used as a default route on the servers. I'm trying to eliminate a single connection bottleneck between the switch and the gateway by adding more physical links, since interVLAN traffic may be intense. What are my options?

Routers 130
article thumbnail

Management VLAN

Network Engineering

Ive also configured SVI 999 with an IP address of 10.10.10.2/24. The default gateway is already configured on the switch as well (which is 10.10.10.1, Ive configured the management VLAN on the switch to be VLAN 999 to separate the management traffic from user traffic. pointing to the routers subinterface).

article thumbnail

2 Firepower 1120 Firewalls connected to a layer-2 switch

Network Engineering

I am working 2 cisco firepower 1120 firewalls, which are connected to a 5-port layer-2 switch through their "outside"(Ethernet1/1) interfaces, each with an IP address of the form 192.168.1.x On that same switch, I have a computer with the same IP format of 192.168.1.x, but no default gateway sepcified.

Firewall 130
article thumbnail

Routing all internet traffic of a wireguard client through another wireguard client [closed]

Network Engineering

24 gateway 10.0.12.52 (wireguard client IP house1) target: 192.168.44.0/24 and 104.19.223.79), which are the public IPs for that website, then the situation changes. What I tested so far:- If set a static route in Brume2 for IPV4 to as follows target:192.168.33.0/24

Internet 130
article thumbnail

How Netflix Accurately Attributes eBPF Flow Logs

Netflix Tech Blog

In this post, we delve deeper into how Netflix solved a core problem: accurately attributing flow IP addresses to workload identities. When a TCP socket closes, FlowExporter generates a flow log record that includes the IP addresses, ports, timestamps, and additional socket statistics.